Series 150 - motor output: 1.5 - 4 kW
Revenue source: raw material savings through return of sprues
The Hellweg 150 series beside-the-machine granulators can be connected very easily to one or more injection moulding machines, due to their especially flat construction.
Extremely bulky sprue cores, sprue gating and complete sprue and runner systems can be removed after opening of the moulding tool and then ground on the spot. Introduction of material can
take place as desired, with a chute, free-fall hopper or conveyor belt. Material can be removed by connecting freely available standard extraction fittings. A tall rack is offered as an option to fill the ground material into a bulk container or bags. When fitted with an appropriate feeding equipment, the machines are used to process film edge strips.
The benefits:
- performance-enhancing diagonal/helical cut
- ideal granulate quality with very low dust
- very quick sieve and knife change
- outer bearing assembly fitted, dust protection
- wear resistant versions for reinforced plastics
- structural design for easy, complete cleaning through absence of dead corners
- direct mounting of the knives on solid rotors
- eliminating need for rotor knife adjustment
- both rotor and stator knives can be re-sharpened many times due to their structural design
- stiff, solid and non-twisting rotors
- belt drive with high performance
- high throughput at low drive power
- almost maintenance-free
Product details
Techn. data:
Working width: | 120 / 230 / 340 mm |
Rotor diameter: | 150 mm |
Motor output: | 1,5 - 4 kW |
No. of rotor knives: | 3 |
No. of stator knives: | 2 |
Rotor speed: | 280 r.p.m. |
Nominal weight: | appr. 170 - 280 kg |
Grinding output: | appr. 10 - 80 kg/h |